Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price: 19.95

New 3 dimensional slide cover plates for your Glock pistol! The plates are machined aluminum and they fit all Glock Gen 1-5 models (except for the G42, 43 and  43x).

Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.

Ships to USA only!

Vendor: Warne
Type: Gun Accessories: Rifle
Price: 35.00

TEMPORARY DELAY: THIS ITEM WILL SHIP ON SEPTEMBER 9

This Side Mount provides a 45° accessory platform that attaches to a Picatinny style rail. The mount can also be mounted to the rail on the hand guard. This is a simple installation and requires no modification to your firearm. 

The Side Mount has been designed with two cut-out sections to achieve an ultra lightweight feel. The side rails offer 4 cross slots.

Features:

• Machined aluminum with anodized finish
• 45° offset offers a mounting position for flashlights, lasers, slings or back-up sights without obstructing your sight line.
• Four Mil-Spec 1913 cross slots to accommodate most Picatinny style accessories.

Logo: Team Warne

Installation:

The 45 degree adapter can be mounted on any 1913 Mil Spec rail. Simply choose the location that you'd like to mount the adapter, loosen the clamp screw, mount the adapter securely onto the picatinny rail and tighten the mounting screw. 

Matching Color Scope Mount:

Get the matching consumerlawyernetwork XSkel Scope Mount!

Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price: 24.95

These replacement magazine floor plates for Glocks are made of durable aluminum, anodized in several fun colors! What to engrave on them? Well, that is totally up to you! Upload an image for a custom plate or send in your custom text - get ideas from our examples below.

Laser Engraving Process:  

• Fiber Laser engraving process.
• Resulting image will not ever wear off, as it is etched into the top layer of the plate.
• We do not put color down on the surface of the plate, we actually engrave into it, so colored images are not possible. 
• The engraved image will be a silvery-white tone on the black and colored plates, and a charcoal tone on the chrome plate. View the product images to get an idea of how it will look. 
• Made in the USA!

• Flat Plate - No Engraving 
• Custom Text - Submit your text (not returnable)
• Custom Graphic - Upload your graphic (not returnable) or select a graphic from the gallery below
• Matching slide cover plates available

  

• Black and white line drawings or graphics work best.
• Two-color graphics will also work.
• Clip Art style designs are best, without a lot of small detail.
• If your image contains shading or gradients, we can't engrave it.
• If it's a photo, we can't engrave it. 
• If you are unsure about whether your graphic will work, contact us before ordering - if we can't make it work, we can usually come up with some alternative suggestions. 

• For custom text, we will use a basic font like Arial unless you request something different.
• If your font choice is a standard Word font, simply give us the font name.
• If it is not a basic Word font, or if you want something fancy, browse free font sites (like www.1001freefonts.com), use their preview box to type up your text in the font you want, take a screenshot or save it as an image file to preserve the font, eg. jpeg, pdf, gif, png, tiff and upload it as a custom graphic.
• Watch out for very curly script fonts - those can be hard to read.
• We can also add text or numbers to any graphic from the gallery below.

Need Ideas? Take a look at the table below for examples of the types of images that work best. You can request them if you want - simply enter the graphic name in the "Custom Graphic" field.  Don't see anything you like? Something else in mind? Find a non-copyrighted graphic and upload it! 

We can't engrave: Marvel Comics copyrighted images eg. The Punisher. Sanrio copyrighted images, eg. Hello Kitty. Glock logo.  Copyrighted business logos, unless you are the owner or you have written permission from the copyright holder.

Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.

Vendor: Backup Tactical
Type: Gun Accessories: Handgun
Price: 29.99

These awesome thread protectors offer a custom look. Screw them on to protect the threads when an accessory is not being used. 

They're constructed from 7075 aluminum. This is the same high quality aluminum used for the upper and lower receivers of high-end billet AR's (less expensive AR's use 6061 aluminum). Each individual thread protector is machined using the latest CNC machines and techniques.

Made in the USA!

Dimensions:

• All pistol thread protectors:  0.4" Long & 0.6" Outside Diameter
• All rifle thread protectors: 0.7" Long & 0.75" Outside Diameter

Thread Pitch:

All designs & all colors are currently available in the most common size, 1/2 x 28 for 9mm/22lr barrels (generally aftermarket barrels).

The following thread pitches are also available, in limited designs and limited color options: 

• M13.5 x 1 LH (9mm & 22lr Euro/Metric - for Glock/Sig/HK with factory threaded barrel)
• .578 x 28 (45ACP US)
• M16 x 1 LH (45ACP Euro/Metric - for Glock/Sig/HK with factory threaded barrels) 
• 1/2 x 28 (.223 & 5.56 rifles - AR15's and some AR9's - ** Please see important note below about AR9's) 
• 5/8 x 24 (For .30 Cal Rifles - 308 AR10 - 300BLK AR - 300 WIN MAG, etc.)

PLEASE NOTE:

Aftermarket Barrels: Most threaded pistol barrels are aftermarket. These are made in the US and use the US threading (1/2 x 28 for 9mm or .578 x 28 for .45).

Factory threaded barrels: New factory Glocks (also Sig & HK) that come stock with threaded barrels are made in Europe and use the Metric threading (13.5 x 1LH for 9mm and M16 x 1LH for .45).

​9mm AR's: Most 9mm AR's are threaded 1/2x36. We do not offer protectors in this thread pitch at all. However, a small percentage of 9mm AR's are threaded 1/2x28. If, in fact, you have a 9mm AR that is threaded 1/2x28, the pistol 1/2x28 thread protectors will NOT work! They will be too short and the diameter will not match the diameter of the AR barrel. So do not order the option marked as "US 9mm & 22 LR - 1/2 x 28". Please order a Rifle Thread Protector, listed as ".223/5.56 Rifles - 1/2 x 28", which will be longer and have the same diameter as the AR barrel! 

Don't shoot with these screwed on: When you are shooting, screw on an accessory or leave the threads bare. These protectors are designed to be screwed on when an accessory is not being used, to protect the threads. It is NOT recommended that you shoot the pistol with the thread protector installed. If you do, you should tighten it after each mag fired just like any other muzzle device that is not permanently attached or clamped down with set-screws.

Included O-Ring:  Every order will ship with a loose, optional O-Ring. These thread protectors have finer threads, because if they are too thick/coarse, they won't fit on all barrels. This is pretty standard, as most accessories have finer threads and most barrels have coarser threads. But if your barrel has fine threads, or if you feel you want a tighter fit for the thread protector, just use the O-Ring. 

AVAILABLE DESIGNS - Hover/touch to view design name. Click/tap to enlarge.

Note: USA Flag and Muddy Girl are the only two designs that have a synthetic colored band wrapped around the aluminum protector. These are designed to be primarily "for show" as the designs will wear over time. All other designs are 100% 7075 aluminum. 

Vendor: Rio Grande
Type: Gun Accessories: Grips
Price: 64.95 - 119.95 (3 variants)

These grips feature full-color, full-coverage images! Select a stock graphic, or submit your own for a custom set of grips! 

The grips are molded using a high strength, engineered polymer that provides toughness and durability.  They are decorated with a patented printing method that infuses the inks into the polymer grip material and provides one of the most permanent image results available today.  Unlike other decorated grips, the images on these grips are resistant to salt, oil, solvent, water, impact and abrasion.  The images aren't on the grips, they're in the grips. 

Available for: 1911 (all mil-spec full size , compact & clones), Sig P938, Beretta 92, Ruger Revolvers

AVAILABLE GRAPHIC OPTIONS

Available Stock Graphics (64.95-74.95) - Hover/touch to view design name. Click/tap to enlarge.

Semi-Custom (+$25): If you would like initials, a date or a name to be added to an existing stock design (no color changes or extra text), select the semi-custom option.

Fully Custom (+$50):  We don't create artwork from scratch, but we will work with the image/s or artwork that you want to use. Custom grips are +$55 for the first set. Subsequent identical sets are the stock price for that grip style  (we save the template, so re-orders or multiple identical sets are not considered custom).

Need ideas? Browse through these pics of custom designs! VIEW CUSTOM GRIPS GALLERY

Steps for custom orders:

• Send your high resolution images for us to review.
  
• Once we determine that your image/s will work, you can place your order.
  
• An electronic proof will be emailed to you within a couple of days of your order being placed. At this time, you can make changes, cancel your order, or approve the proof for production.
  
• If approved, it takes about 10 days to make the grips.
  
• Custom and semi-custom grips are not returnable.
• Unsure if your idea will work? Please contact us, email any images and let's discuss before you order.  
• CUSTOM GRIPS - EVERYTHING YOU NEED TO KNOW

GRIP FIT INFO

◄For 1911

• Compatible with ambidextrous safety.  
• All sizes except compact have a smooth texture.
• Compact size has slightly textured surface. 
• Will fit: All standard, mil-spec full-size 1911's and clones or compact 1911 
• Screws: Your stock screws will fit these grips 
• What size grips do you need? If your grip height is 5.25" (height 90 degrees to barrel center), you have a full-size grip frame. Less than that is a compact.  Full-size 1911 will have a screw hole spacing (center-to-center) of approximately 3 1/16”.  The same spacing on the compact model 1911 will be about 2 11/16”.  
• The 1911 grips will NOT fit these models as they are not standard size: Springfield EMP, Star BM 9mm, Browning 1911-.380, Coonan Classic, MK IV, Ruger SR1911 Compact Officers Model 

◄For SIG P938

• Compatible with ambidextrous safety. Grips have a slightly textured surface.

◄For Beretta 92/92FS/96/M9

• Compatible with all full-size models in these series that have MIL-SPEC grips.  Grips have slightly textured surface. 
• Will NOT fit: Model 92S, Model M9A3, 92 Vertec Inox, 92 FS Centennial, 92 Compact Models

◄For Ruger Revolvers

• Select "Ruger" to fit: The XR3-Red made from 1962 - 2004, the largest of Ruger's standard gripframes: Ruger Blackhawk, Super Blackhawk 4.5 - 6.5" barrel lengths with round back trigger guard, Single Six, Old Army, and Old Vaquero models. (Will NOT fit: Old Model XR-3 used on original 3-screw guns manufactured 1953 - 1962; Bisley and Birdshead gripframes; .22 Bearcat gripframe; or the Super Blackhawk 7.5" - 10" barrel length with the square back trigger guard).
• Select "Ruger XR3" to fit: New Model Vaquero, 50th anniversary Blackhawk, Super Blackhawk with square trigger guard with barrel shorter than 7.5", Ruger Flat-Top Blackhawk, pre-1963 Single Six (Will NOT fit Dragoon models).
• If you're unsure which Vaquero model you have, the Old Model has a serial number with a 2-digit prefix, and the New Model has a serial number with a 3-digit prefix (for example, 512-48556).
• These stock graphics do not work on the revolver grips due to shape/placement issues, please don't select them: Digital Camo, Flaming Aces, Grim, Lavender Dagger, Pink Venom, POW-MIA, Scorpion, Silver & Gold Dragon, Veritas Aequitas, Zombie

Vendor: RYG
Type: Gun Accessories: Handgun
Price: 99.95

This Phantom trigger for Glocks is engineered with innovative features conveniently housed within the trigger pad, for the ultimate performance experience in a sleek, seamless design. This drop-in trigger is CNC machined from billet 6061 T6 aluminum and hard anodized. Transform your stock factory Glock trigger into a highly accurate, dynamic and reliable trigger system!

Tune the trigger to your preferred specifications:

• Adjust pre-travel take-up and over-travel engagement.
• Tuning action is achieved by two opposing, conveniently located 2/56 inch adjustment screws. 

• Set screws in front and back of the trigger to adjust over-travel and pre-travel.
• All aluminum trigger milled out of solid billet aluminum.
• Wide, ergonomic trigger safety is completely flush when depressed.
• Very short trigger reset.
• All Glock safeties fully functional.
• Instructions and allen key included.
• Compatible with all Glock calibers and size formats.
• Easily installed. 
• Ships FREE!
• Made in the USA.

Worth noting:

• Distinctive, spring loaded, anatomical engagement safety maintains full responsiveness and reliability without ever sacrificing safety.
• Precision-machined trigger bar boasts mirror polishing on all engagement and contact surfaces.  This element greatly increases the sensitivity and overall performance of the trigger. 

Please note:  Pull weight cannot be adjusted with this trigger, only pre-travel and over-travel.

Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc., nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.

Vendor: RYG
Type: Gun Accessories: Handgun
Price: 19.95

Snag-free, aluminum mag release feels a lot better on your thumb! Made from durable anodized aluminum. No modifications are necessary, and it is easily installed or removed in minutes.  Guaranteed to not chip or deform.  Will not interfere with concealment or duty holsters. The color of these releases matches the color of all other available anodized parts for Glock, eg. slide cover plates. 

Made in the USA!

GEN 3 MODELS:

• Stock length release is not available in  OD Green. Extended length is available in all colors. 
• The extended release is 0.10" longer than the stock magazine release to allow for a quicker magazine drop. Fits 9mm, .40 cal, .357 Gen 3 Glocks only. (The extended release is actually the stock length for models 34 and 35). 

GEN 4 and 5 MODELS 

• The release for Gen 4/5 is designed for ambidextrous use - by either right or left handed shooters.  Fits 9mm, .40 cal, .357 Gen 4 Glocks only.
• Stock length release is not available in OD Green.
• Extended length is available in all colors. 

GLOCK 42 

• Ambidextrous release for Glock 42 only.
• Available colors: Black, Chrome, Red, Pink, Purple

GLOCK 43 

• Ambidextrous release for Glock 43 only
• Available colors: Black, Chrome, Red, Pink, Purple, OD Green

GLOCK 43X

• Ambidextrous release for Glock 43X
• Available colors: Black, Chrome, Red

Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork, not this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.

Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price: 24.95

These replacement slide cover plates for Glock are made of durable aluminum and anodized in several fun colors! What to engrave on them? That is totally up to you! Upload an image or text for a custom plate, or select one of the example graphics in the gallery below.

Laser Engraving Process:  

• Fiber Laser engraving process.
• Resulting image will not ever wear off, as it is etched into the top layer of the plate.
• We do not put color down on the surface of the plate, we actually engrave into it, so colored images are not possible. 
• The engraved image will be a silvery-white tone on the black and colored plates, and a charcoal tone on the chrome plate. View the product images to get an idea of how it will look. 
• Made in the USA!

• Flat Plate - No Engraving 
• Custom Text - Submit your text (not returnable)
• Custom Graphic - Upload your graphic (not returnable) or select a graphic from the gallery below
• Matching magazine floor plates available

  

• Black and white line drawings or graphics work best.
• Two-color graphics will also work.
• Clip Art style designs are best, without a lot of small detail.
• If your image contains shading or gradients, we can't engrave it.
• If it's a photo, we can't engrave it. 
• If you are unsure about whether your graphic will work, contact us before ordering - if we can't make it work, we can usually come up with some alternative suggestions. 

• For custom text, we will use a basic font like Arial unless you request something different.
• If your font choice is a standard Word font, simply give us the font name.
• If it is not a basic Word font, or if you want something fancy, browse free font sites (like www.1001freefonts.com), use their preview box to type up your text in the font you want, take a screenshot or save it as an image file to preserve the font, eg. jpeg, pdf, gif, png, tiff and upload it as a custom graphic.
• Watch out for very curly script fonts - those can be hard to read.
• We can also add text or numbers to any graphic from the gallery below.

Need Ideas? Take a look at the table below for examples of the types of images that work best. You can request them if you want - simply enter the graphic name in the "Custom Graphic" field.  Don't see anything you like? Something else in mind? Find a non-copyrighted graphic and upload it! 

We can't engrave: Marvel Comics copyrighted images eg. The Punisher. Sanrio copyrighted images, eg. Hello Kitty. Glock logo.  Copyrighted business logos, unless you are the owner or you have written permission from the copyright holder.

Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.