Clips and Hardware for Customizable Holsters

The kit is enough to do 1 IWB and 1 OWB holster. 

• 3 - 1/8" binding post
• 6 - 3/16 8-32 screws
• 3 - 3/16" binding post
• 1 - 3/16" 8-32 pan head screw
• 2 - finishing washers
• 2 - o-ring lock washers
• 1 - 1/8" spacer
• 1 - 3/16" spacer

The belt clips will only fit the holster/s indicated next to each clip name below. 

Belt Clips ($5 - 14.99):

• Wings (one pair): For Two-in-One Holster, 1.5" or 1.75", pre-drilled at standard spacing of 1 11/16" or undrilled. 
• Closed OWB Loops (one pair): For Two-in-One Holster, 1.5" or 1.75", pre-drilled with holes 1 11/16" on center. Not available undrilled.
• Open OWB Loops (one pair): For Two-in-One Holster, 1.5" or 1.75", pre-drilled at standard spacing of 1 11/16" or undrilled.
• IWB/OWB Belt Clip (single clip): For Adjustable IWB and Adjustable OWB, 1.5" or 1.75".
• Paddle Clip (single clip): For Adjustable OWB
• Ulticlip 3 (no belt needed): For Adjustable Ulticlip IWB only.
• Ulticlip XL (use with or without belt): For Adjustable Ulticlip IWB only. 
• Over The Belt Polymer IWB Clips: For Trigger Guard IWB Carry, 1.5" or 1.75", pre-drilled or undrilled (Include Order Note Advising Which Ride Height You Prefer, "A", "B", or "C" Or Drill For All Three)

Adhesive Fastener for Purse/Backpack Holster ($$12 per pack):

• Pack for Purse/Backpack Holster: 4 sheets of hook (rough side) and 4 sheets of loop (soft side)
• Pack for Flat Back Holster: 4 sheets of hook (rough side) and 4 sheets of loop (soft side) 

Vibra-Tite 121 Medium Strength Thread Locker ($3):

This Vibra-Tite™ formula is a medium strength threadlocker designed for locking threaded fasteners and screws up to 3/4'' in diameter that require disassembly with standard hand tools.